EN
34
Troubleshooting
If the device should stop working properly,
fi
rst check whether you are able to correct
the problem yourself.
Do not attempt to repair a defective electrical device yourself!
Problem
Possible cause/solution
The device generates no
suction.
• Is the plug inserted in the mains socket correctly?
• Is the mains socket defective? Try another mains
socket.
• Check the fuse of your mains connection.
• Is the device switched on? Press the On/Off but-
ton.
Low suction force.
• Is the exhaust air valve in the handle open? Close
it.
• Adjust the suction strength on the suction strength
control.
• Is the dust container full? Empty the dust container.
• Is the HEPA
fi
lter or one of the other
fi
lters clogged
up? Clean the
fi
lters.
• Is the nozzle, the telescopic tube or the suction
hose clogged? Pull the mains plug out of the socket
and remove the objects causing the blockage from
the nozzle, telescopic tube and/or suction hose.
Dust escapes from the de-
vice during cleaning.
Check whether the HEPA dust
fi
lter is inserted into
the dust container correctly and whether the dust con-
tainer is closed and inserted correctly. Correct this if
necessary.
Unusual odour
A new odour is normal when the device is used for the
fi
rst time and this does not indicate a defect with the
device. The odour will disappear after a little while.
Technical data
Model:
KPA12
Product no.:
Z 07504
Voltage supply:
220 – 240 V~ 50/60 Hz
Output:
700
W
Protection class:
II
Customer Service / Importer:
DS Produkte GmbH
Am Heisterbusch 1
19258 Gallin
Germany
Tel.: +49 38851 314650
(Calls subject to a charge. The cost
varies depending on the service
provider.)
All rights reserved.
07504_DE-EN-FR-NL_A5_V1.indb 34
07504_DE-EN-FR-NL_A5_V1.indb 34
18.08.2015 15:52:15
18.08.2015 15:52:15
