19
EN
Accessories
• The
wall
bracket
(
I
) is intended to save space when storing the device (
Fig. F
). The
crevice (
B
) and brush (
C
) nozzles, as well as the nozzle adapter (
A
), can be clipped
into the semi-circular notches on the wall bracket
(
Fig. H
).
• The
brush
nozzle
(
D
) is for vacuuming cushions and textiles, and for dusting fragile
objects such as picture frames, lampshades, keyboards, books, etc.
• The
crevice nozzle
(
B
) is for hard-to-reach places like corners, crevices and re-
cesses.
• The
electric fl oor nozzle
(
H
)
is suitable for both carpets and hard fl oors. It has a
rotating cleaning brush to make it easier to pick up hair and fl uff .
• The
nozzle adapter
(
A
) is needed to attach the crevice (
B
) and brush (
D
) nozzle.
• The
extension tube
(
F
) makes it easier to reach the tops of cupboards, ceilings
and corners and, along with the electric fl oor nozzle
(
H
), allows fl oors to be cleaned.
• The
holder for the brush and crevice nozzle
(
G
) is suitable for securing the two
nozzles to the extension tube (
F
) easily to save space.
Assembly
Attach / remove extension tube and electric fl oor nozzle
•
Attaching:
The extension tube (
F
) is plugged onto the suction opening (
12
). It must
engage audibly. Attach the electric fl oor nozzle (
H
) to the extension tube in the same
way.
•
Removing:
Press the corresponding release button
(
Fig. A
) and pull the electric
fl oor nozzle (
H
) or the motor unit (
E
) out at the same time.
Attach / remove crevice and brush nozzle
The crevice (
B
) and brush (
D
) nozzles can be attached to either the suction opening (
12
)
or the extension tube (
F
). This requires the nozzle adapter (
A
).
•
Attaching:
First plug the the nozzle adapter into the suction opening or the exten-
sion tube. Then plug the desired nozzle into the nozzle adapter.
•
Removing:
Unplug the used nozzle from the nozzle adapter and pull the nozzle
adapter out of the suction opening or the extension tube.
Remove / insert dust collector
•
Removing:
Press the unlock button (
2
) at the top of the dust collector (
9
) and pull
the dust container upwards to remove it from the motor unit (
E
).
•
Inserting:
Insert the dust collector (
9
) diagonally into the motor unit (
E
). Make sure
that it sits correctly in the latch on the motor unit (
Fig. B
). The dust collector should
click audibly as it closes.
Remove / insert battery
•
Removing:
Press the unlock button on the battery and simultaneously pull it out
(
Fig. C
).
•
Inserting:
Before inserting the battery, check whether the contacts are clean, and
clean them if needed. Insert the battery into the compartment on the underside of
the motor unit (
E
). It should click audibly.
Содержание 04172
Страница 48: ...NL 48 ...