19
EN
Cleaning the Motor Filters
The motor
fi
lters are located beneath the lid (
19
) of the dust container (
3
).
1. Take the dust container out of the device (see “Emptying the Dust Container”).
2. At the bottom end of the carrying handle (
12
) is the release button for the
fi
lter com-
partment (
18
). Pull on it and
fl
ip open the lid.
3. Take out the
fi
lter holder with the foam
fi
lter (
Picture K
).
4. Tap out both parts over a dustbin and brush o
ff
any loose dirt.
PLEASE NOTE: The white motor
fi
lter is
fi
rmly
fi
xed to the
fi
lter holder and cannot
be taken out!
5. Reinsert the
fi
lters and
fl
ip the lid shut until you hear it engage in place.
Cleaning the HEPA Exhaust Air Filter
The HEPA exhaust air
fi
lter (
13
) is located behind a cover on the bottom of the vacuum
cleaner.
1. Pull on both fasteners of the cover at the same time to open up the cover. Then take
o
ff
the cover.
2. Remove the HEPA exhaust air
fi
lter and tap it out over a dustbin. Brush it out with a
soft brush if necessary.
Do not wet-clean the HEPA exhaust air
fi
lter!
3. Brush or wipe out the
fi
lter compartment if necessary.
4. Insert the HEPA exhaust air
fi
lter into the
fi
lter compartment.
5. Insert the cover and
fl
ip it shut.
Storage
• Hook
the
fl
oor nozzle (
1
) into the holder (
22
) on the back of the device (Picture
L
) and
collapse the telescopic tube (
5
).
• Plug the combi nozzle (
2
) and the upholstery nozzle (
7
) onto the nozzle holder.
• Store the device in a cool, dry place which is protected from direct sunlight and is out
of the reach of children and animals.
Technical Data
Article numbers:
08956 (berry); 03453 (metallic red)
Model number:
CP-CY3302-2
Voltage supply:
220 – 240 V ~ 50 Hz
Power:
800 W
Protection class:
II
Capacity of dust container:
1.5 l
ID of operating instructions: Z 08956_03453 M DS V3 0520 md
08956_03453_Inlay_de-en-fr-nl_A5_V3.indb 19
08956_03453_Inlay_de-en-fr-nl_A5_V3.indb 19
07.05.2020 15:05:26
07.05.2020 15:05:26
