CleanMax ZOOM ZM-500, Руководство пользователя

Страница: 9 / 20

7
Operation
Reclining the Handle
• Press the handle release pedal located on the back
of the vacuum with your foot to recline the
handle (Fig. 1).
On/Off Switch, Two Speed
• The power switch located on the vacuum handle,
is a three-way switch (Fig. 2). The middle position
is the “Off” setting, the rear position is the “On”
setting and the forward position is for “Maximum
Power” (Fig. 3).
• Use the “Maximum Power” setting for carpet
cleaning. Use the “On” setting for cleaning bare
floors and throw rugs.
Always turn the vacuum
cleaner to the “Off” setting before unplugging it
from the electrical outlet.
Edge Cleaning
The edge cleaning feature provides improved
cleaning near walls and stationary furniture. For
maximum edge cleaning, place the left side of the
nozzle, from the user’s perspective, against the wall or
stationary furniture.
Automatic Carpet Height Adjustment
Your vacuum is designed with an automatic self-
adjusting nozzle. No manual adjustments are
required. The height of the nozzle automatically
adjusts to the flooring surface. This self-adjusting
feature allows the nozzle to float evenly over all
flooring surfaces.
Bare Floor Cleaning
Your vacuum is equipped with a squeegee on the
bottom of the vacuum to improve its effectiveness
in cleaning bare floors (Fig. 4). When cleaning tile,
hardwood, vinyl, etc., use the “On” setting for best
results.
MATERIAL
DRAWN
ISSUED
SCALE
FINISH
DATE
DATE
DO NOT SCALE
UNLESS OTHERWISE SPECIFIED
DESCRIPTION
DRAWING SIZE:D
PART NUMBER
SHEET 1 OF 1
X.X ± .02 IN RADII X.X ± .02
X.XX ± .01 IN X,XX ± .01
X.XXX ± .005 IN MACHINE SURFACE
X.XXXX ± .0005 IN BREAK SHARP CORNERS TO .010 MAX
± 0 ° 30" COMMON TO BE CONCETRIC TO .002
TACONY CORPORATION CLAIMS PROPRIETARY
RIGHTS IN THE MATERIAL DISCLOSED HERE IN.
THIS DRAWING IS ISSUED FOR ENGINEERING
INFORMATION ONLY. IT MAY NOT BE REPRO-
DUCED, NOR MAY THE INFORMATION HERE IN
BE USED FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMISSION FROM TACONY
CORPORATION.
1.000
TACONY CORPORATION
1760 Gilsinn Lane, Fenton, MO 63026
PART NUMBER
DESCRIPTION OF CHANGE
REV PART NUMBER SHEET
1 OF 1
A
B
C
D
1
2 3 4
5
6 7
8
A
B
C
D
1 2 3 4 5 6 7 8
BY ECN NO DATE REV
5.000 SCALE
Fig. 2
Fig. 1
Fig. 3
MATERIAL
DRAWN
ISSUED
SCALE
FINISH
DATE
DATE
DO NOT SCALE
UNLESS OTHERWISE SPECIFIED
DESCRIPTION
DRAWING SIZE:D
PART NUMBER
SHEET 1 OF 1
X.X ± .02 IN RADII X.X ± .02
X.XX ± .01 IN X,XX ± .01
X.XXX ± .005 IN MACHINE SURFACE
X.XXXX ± .0005 IN BREAK SHARP CORNERS TO .010 MAX
± 0 ° 30" COMMON TO BE CONCETRIC TO .002
TACONY CORPORATION CLAIMS PROPRIETARY
RIGHTS IN THE MATERIAL DISCLOSED HERE IN.
THIS DRAWING IS ISSUED FOR ENGINEERING
INFORMATION ONLY. IT MAY NOT BE REPRO-
DUCED, NOR MAY THE INFORMATION HERE IN
BE USED FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMISSION FROM TACONY
CORPORATION.
1.000
TACONY CORPORATION
1760 Gilsinn Lane, Fenton, MO 63026
PART NUMBER
DESCRIPTION OF CHANGE
REV PART NUMBER
SHEET
1 OF 1
A
B
C
D
1 2 3 4 5
6
7 8
A
B
C
D
1 2 3 4 5 6 7 8
BY ECN NO DATE REV
5.000 SCALE
ON
OFF
MAX
POWER
Fig. 4
DESCRIPTION
DRAWING SIZE:D
PART NUMBER
SHEET
1
OF
1
±
.02
±
.01
°
30" COMMON
TO BE CONCETRIC TO .002
TACONY CORPORATION CLAIMS PROPRIETARY RIGHTS IN THE MATERIAL DISCLOSED HERE IN. THIS DRAWING IS ISSUED FOR ENGINEERINGINFORMATION ONLY. IT MAY NOT BE REPRO-DUCED, NOR MAY THE INFORMATION HERE INBE USED FOR MANUFACTURING PURPOSESWITHOUT WRITTEN PERMISSION FROM TACONYCORPORATION.
DESCRIPTION OF CHANGE
REV
PART NUMBER
SHEET 1
OF
1
A
B
C
D
1
2
3
4
5
6
7
8
7
8