CleanMax ZOOM ZM-500, Руководство пользователя

Страница: 7 / 20

5
Assembling the Vacuum
Attaching the Handle to the Vacuum
NOTE: Do not plug in the vacuum until it is
completely assembled.
The vacuum cleaner and the handle are
packed separately and require assembly.
• Thread the cord through the lower and
upper cord guides on the back of the
vacuum bag (Fig. 1).
• Remove the handle bracket by removing
the two screws (Fig. 2).
• Place handle onto the back of the vacuum,
aligning holes with pegs (Fig. 3).
• Place the handle bracket back into
position (Fig. 4).
• Secure with two screws removed in Step 2.
• Open the bag compartment to ensure a
vacuum bag is in place.
• Your vacuum is now ready for use.
• If storing the vacuum, wrap the cord
clockwise around the top and bottom cord
hooks. Fasten the plug to the wrapped cord
using the channel on the plug.
DESCRIPTION
DRAWING SIZE:D
PART NUMBER
SHEET
1
OF
1
±
.02
±
.01
°
30" COMMON
TO BE CONCETRIC TO .002
TACONY CORPORATION CLAIMS PROPRIETARY RIGHTS IN THE MATERIAL DISCLOSED HERE IN. THIS DRAWING IS ISSUED FOR ENGINEERING INFORMATION ONLY. IT MAY NOT BE REPRO- DUCED, NOR MAY THE INFORMATION HERE IN BE USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM TACONY CORPORATION.
DESCRIPTION OF CHANGE
REV
PART NUMBER
SHEET 1
OF
1
A B C D
1
2
3
4
5
6
7
8
7
8
DESCRIPTION
DRAWING SIZE:D
PART NUMBER
SHEET
1
OF
1
±
.02
±
.01
°
30" COMMON
TO BE CONCETRIC TO .002
TACONY CORPORATION CLAIMS PROPRIETARY RIGHTS IN THE MATERIAL DISCLOSED HERE IN. THIS DRAWING IS ISSUED FOR ENGINEERING INFORMATION ONLY. IT MAY NOT BE REPRO- DUCED, NOR MAY THE INFORMATION HERE IN BE USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM TACONY CORPORATION.
DESCRIPTION OF CHANGE
REV
PART NUMBER
SHEET 1
OF
1
A B C D
1
2
3
4
5
6
7
8
7
8
Fig. 2
Fig. 3
Fig. 4
MATERIAL
DRAWN
ISSUED
SCALE
FINISH
DATE
DATE
DO NOT SCALE
UNLESS OTHERWISE SPECIFIED
DESCRIPTION
DRAWING SIZE:D
PART NUMBER
SHEET 1 OF 1
X.X ± .02 IN RADII X.X ± .02
X.XX ± .01 IN X,XX ± .01
X.XXX ± .005 IN MACHINE SURFACE
X.XXXX ± .0005 IN BREAK SHARP CORNERS TO .010 MAX
± 0 ° 30" COMMON TO BE CONCETRIC TO .002
TACONY CORPORATION CLAIMS PROPRIETARY
RIGHTS IN THE MATERIAL DISCLOSED HERE IN.
THIS DRAWING IS ISSUED FOR ENGINEERING
INFORMATION ONLY. IT MAY NOT BE REPRO-
DUCED, NOR MAY THE INFORMATION HERE IN
BE USED FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMISSION FROM TACONY
CORPORATION.
1.000
TACONY CORPORATION
1760 Gilsinn Lane, Fenton, MO 63026
PART NUMBER
DESCRIPTION OF CHANGE
REV PART NUMBER SHEET
1 OF 1
A
B
C
D
1 2 3 4 5 6 7 8
A
B
C
D
1 2 3 4 5 6 7 8
Fig. 1