CleanMax ZOOM ZM-500, Руководство пользователя

Страница: 8 / 20

6
Assembling the Vacuum
Attaching the Extension Power Cord to
the Cord Lock
• Connect the extension power cord to
the pigtail cord on the vacuum.
• Snap the extension power cord into the
slot on the end of the cord lock.
• Turn the knob on the bottom of the
cord lock to tighten the lock and
prevent the cords from pulling
apart (Fig. 1).
Attaching the Cord Retainer to the
Handle
• Pull apart the rounded end of the cord
retainer to open it up enough to fit
around the carry handle (Fig. 2).
• Attach the cord retainer around the
carry handle.
• Create a loop in the power cord and
push it through the slot and over the
hook of the cord retainer.
• Pull down on the power cord to remove
any slack.
Unwinding the Power Cord
• The lower cord hook rotates to allow for
quick access to the power cord (Fig. 3).
Turn the lower cord hook upward and
you can quickly drop the power cord to
the floor without unwinding it from the
cord hooks.
• When storing the vacuum cleaner, turn
the lower cord hook to the downward
position and wind the power cord around
the cord storage hooks.
DESCRIPTION
DRAWING SIZE:D
PART NUMBER
SHEET 1 OF 1
±
.02
±
.01
° 30" COMMON
TO BE CONCETRIC TO .002
TACONY CORPORATION CLAIMS PROPRIETARY
RIGHTS IN THE MATERIAL DISCLOSED HERE IN.
THIS DRAWING IS ISSUED FOR ENGINEERING
INFORMATION ONLY. IT MAY NOT BE REPRO-
DUCED, NOR MAY THE INFORMATION HERE IN
BE USED FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMISSION FROM TACONY
CORPORATION.
DESCRIPTION OF CHANGE
REV
PART NUMBER
SHEET
1 OF 1
A
B
C
D
1
2
5
6
7
8
7
8
Fig. 2
Fig. 3
Fig. 1