Cleanfix TW Compact Скачать руководство пользователя страница 4

Страница: 4 / 40

1.1 Description

●

Convenient, easy-to-handle carpet cleaner with rotary

brush.

●

Can be used for cleaning both forwards and backwards.

●

Ergonomically arranged controls.

●

Fresh and dirty-water tanks separated by a

diaphragm wall, to ensure maximum capacity in a

confined space.

●

Dirty-water tank can be emptied fast and easily with a

drain hose; clean-water tank can be emptied with a

hose and nipple via the adapter.

1.2 General infonnation

The TW-Compact is suitable for cleaning all piled carpeting,
cemented,  stretched  and  loose-laid  fitted  carpets  with
synthetic or woven backings.
Using warm water (max. 50° C) improves the cleaning effect
and  facilitates  the  removal  of  any  oily  or  greasy
contamination.
Care  should  be  taken  when  cleaning  fitted  carpets  with  a
jute backing. If such carpeting is wetted excessively, it may
shrink and become discoloured.
Before using the TW-Compact, it is best to vacuum -clean
the carpeting.
Very  dirtyspots  should  first  be  sprayed  with  an  up  to  3%
solution of carpet cleaner, depending on how dirty they are.
Time to react: approx. 5 minutes.

1.3 Transporting the cleaner

☞

The cleaner must be lifted with the handles when it is
carried over a threshold. It is easy to transport on
account of its large wheels (e.g. upstairs).

1.4 Commissioning

☞

Connect the 20 metres extension

cable by making a loop in the

cable and push it through the

hole of the cable tensioner (A).

Pull the loop and place it over

the holder for the cable.

☞

Make sure that the electrical

tension on the units corres-

ponds to the tension in your

cable socket.

☞

Connect the extension cable (C) to the short cable (B)

of the unit.

☞

Plug into an earthed (grounded) power socket.

If an extension lead Is used, It must always be

completely unwound from the drum. Make sure it

has an adequate crosssection, or a short-cIrcuit may

result from the cable being overheated (scorching; wire

cross-section 1.5mm

for leads up to 10 m long or 2.5

tor leads up to 30 m long).

☞

Press the red lever (X) on the

right-hand side of the front of

the cleaner downwards to do

so. This will considerably in-

crease the service life of the
brush.

1.5 Filling with cleaning solution

☞

Fill the tank with clean water.

☞

Detergent in the required concentration to admit. (See
dosage application etiquette).

Use only low-sudsing detergent that are
specifically approved for cleaning machines.

For damages caused to the vacuum motor by foam
entering the manufacturer gives absolutely no warranty.
In case of foam occuring in the tank and anti foam
agent to the dirty water tank!

2. Operation

2.1 Brushing and vacuuming

Before using the TW-Compact, it is best to vacuum -clean
the carpeting.

☞

Lower the brush by turning the lever for brush relieve ( X ).

☞

Switch-on in following order

Pumpe ( 4 ), Vacuum motor ( 2 ),

Brush drive ( 3 ).

☞

The rotary brush then rotates in

the forward direction. You can

change the direction by pressing

the lever (5) on the right-hand side of the push handle. The
cleaner then works backwards.
Clean slowly and evenly in the forward and backward
directions.

Note!

Make sure that the dirty water tank, before he full, is emp-
tied through the drain hose. otherwise it is possible that
water in the suction motor arrives.

During breaks always relieve the brush by lifting it with the
lever to relieve the brush. Life expectancy of the brush will
be increased.

2.2 Application notes

☞

Work always from Iight to shade, ie. from the window
towards the door.

☞

Work always away from the cleaned surface towards

the uncleaned surface.

☞

Make passes away from where the power lead is lying.

☞

Clean the next pass, slightly overlapping the pass that

has already been cleaned.