8
Sweeping operation
Safety instructions
Do not switch on the vacuum motor when
sweeping wet areas/wastes This would
lead to a clogged filter and damage to the
vacuum motor. In closed rooms make
sure to have a proper room aeration.
Never sweep wastes dangerous to
health.
Operator panel (without overhead
disposal)
Operation of the cyclindrical brush
• Start the Ride-on-Sweeper
• Release the lever to lower the cylindri-
cal brush to the floor.
• Switch the Tip switch to ON to start
the cylindrical brush
☞
On the switch a control light will shine.
Stopping Cylindrical brush operation:
• Switch the Tipp switch for the cylind-
rical brush to OFF.
• Pull the lever for the cylindrical brush up-
wards and let it sideways fall in the latch.
Operation of the side brushes
• The side brushes are fixed to swivel
connections. When the side brushes
collide with an obstacle they swivel to
the side which prevents damage to
the Ride-on-Sweeper.
• Start the Ride-on-Sweeper.
• Release both levers which hold both
side brushes off the floor. The levers
are on the left and right side of the
steering pillar.
• Move the lever downwards.
• Switch the Tipp switch for side
brushes to ON position.
☞
On the switch a control light will shine.
The side brushes begin to rotate.
Ending the side brush operation:
• Switch off the Tipp switch for the
side brushes
• Pull both lever of the side brushes
upwards and let it fall in each latch.
• Engage the lever.
Switch for side brushes
1
0
ON
OFF
ON
OFF
ON
OFF
Switch for cylindrical brush
Switch for vacuum
motor (suction)
Emergency-Off—
Main Switch
Battery charge
status-indication
Switch for
filter cleaning
(vibration)
ON– and OFF Key switch
Swi
ss Made Quality
.
2 levers to lift
and sink the
side brushes
1 lever to lower the
cylindrical brush
KS 1100 -
Englisch
