Safety, Operations and Maintenance Manual for Floor Mac; Version 1.0
7
WHERE TO USE THE MACHINE:
Hard floors and staircases, oily or sealed
parquetry, plastic floors and PVC, linoleum,
earthenware slabs, clinkers, tiles, natural and
cast stone, magnesite composition etc...
CLEANING:
•
Fill the bottle (3) with floor cleaning chemical
and water (follow dilution ratio on chemical
bottle) and pull pressure relief vent (9)
upwards.
•
Put the pad driver (22) with the cleaning pad
(23) or the micro-fiber pad (24) on the floor
and place the machine into it.
•
Press the solution trigger (1) until the first
drops from the bottle are on the floor,
•
then turn on the ON/OFF switch and make
use of the product immediately.
•
After having finished work, press pressure
relief vent (9) on the bottle (3) downwards.
•
Take the pad driver and pad off to ensure
that the machine never keeps standing on
the cleaning, polishing or micro-fiber pad.
POLISHING:
•
Fill the bottle (3) with floor polishing
chemical and water (follow dilution ratio on
chemical bottle) and pull pressure relief
button (9) upwards.
•
Put the pad driver (22) with the polishing
pad (21) on the floor and place the machine
to it.
•
Press the solution trigger (1) until the first
drops from the bottle are on the floor,
then turn on the ON/OFF switch and make
use of the product immediately.
•
Work the polishing agent in with the
machine using a polishing pad.
•
After having finished work, take the pad
driver and polishing pad off to ensure that
the machine never keeps standing on the
polishing pad.
STORAGE OF FLOOR MAC
This floor machine should be stored in an
upright position. Objects should not be stored or
stacked on top of unit.
Always store the floor machine in a dry,
protected area at temperatures above freezing.
This unit should not be stored in vehicles or
areas where extreme heat or cold occurs.
MAINTENANCE AND REPAIR
•
Only do maintenance work described in this
manual.
•
Always use original spare parts.
•
WARNING! Do not make any technical
alterations to floor machine. This can put
your safety at risk and will void the warranty.
•
Always contact authorized service center or
factory for other maintenance and repair
work. If you maintain the machine carefully it
will stay in good working condition for a long
period of time. Regularly check the machine
for any wear and tear.
•
Before cleaning or servicing the machine
always turn off the brush motor and unplug
the power cord.
•
Don’t damage the cord by driving over it,
crushing or tugging it.
•
Regularly check the power cord for signs of
damage.
•
When transporting the machine in elevators,
always put the handle in straight-vertical
position.
•
Never use highly flammable, combustible,
toxic, health-hazardous, corrosive or irritant
substances.
Always disconnect power cord
before cleaning and maintaining the
floor machine.
WARNING
