Safety, Operations and Maintenance Manual for Floor Mac; Version 1.0
8
TROUBLESHOOTING
Symptom:
Machine does not run! No power to the machine!
Problem:
Machine not plugged in.
Solution:
Plug machine into power outlet.
Problem:
Blown fuse/circuit breaker in the building / room has tripped.
Solution:
Replace fuse with the same rating. Reset circuit breaker. Make sure no other appliances
are connected on the same circuit as the machine.
Problem:
Power supply interrupted.
Solution:
Have power supply checked by authorized technician.
Problem:
Frayed cord, damaged plug or loose internal wiring.
Solution:
Have an authorized service technician check cord and replace if necessary. Have an
authorized service technician open switch panel and check for loose wire connection.
Symptom:
Poor cleaning performance!
Problem: Worn
pad.
Solution: Replace
pad.
Problem:
Improper chemical for cleaning job or improper dilution.
Solution:
Change chemical or adjust dilution.
Symptom:
Brush motors will not run!
Problem:
Fuse blown or circuit breaker in the building / room tripped.
Solution:
Replace fuse with the same rating. Reset circuit breaker. Make sure no other appliances
are connected on the same circuit as the machine.
Problem:
Loose wiring or faulty motor.
Solution:
Have an authorized service technician trace and repair.
Service and repairs should only be performed by authorized personnel.
WARNING
