Cleaner Wash CW1400-3F, Руководство пользователя

Страница: 17 / 21

Troubleshooting
DANGER Risk of electric shook.
Turn off the appliance and remove the main plug prior to performing any care and maintenance work.
Repair work and work on the electrical components may not only be performed by an authorized
customer service. You can rectify minor faults yourself with the help of the following overview. If in
doubt, please consult the authorized customer service.
Symptom Cause Recommended action
Machine refuses
to start
Machine not plugged in
Defective socket
Fuse has blown
Defective extension cord Plug in machine
Try another socket.
Replace fuse. Switch off other machines.
Try without the extension cord.
Fluctuating pressure Pump sucking air
Valves dirty, worn out or stuck
Pump seals worn out Check that hoses and connections are
airtight.
Clean and replace or refer to local
distributor
Clean and replace or refer to local
distributor
Machine stops Incorrect mains voltage
Thermal sensor activated
Nozzle partially blocked Check that the mains voltage corresponds
to specification on the model tag.
Leave the washer for 5 minutes to cool
down. Clean the nozzle
Machine pulsating Air in inlet hose
Inadequate supply of mains water
Nozzle partially blocked
Water filter blocked
Hose kinked Allow machine to run with open trigger
until regular working pressure resumes.
Check that the water supply corresponds
to specifications required
NB! Avoid using long, thin hoses (min.
1/2").Clean the nozzle /Clean the filter
Straighten out hose.
Machine starts, but no
water comes out Pump/hoses or accessory frozen
No water supply
Water filter blocked /Nozzle blocked Wait for pump/hoses or accessory to
thaw. Connect inlet water.
Clean the filter /Clean the nozzle