Operation
dryCAT-Series | Version 1.02
11
8.1 Start and Stop
Start
- Unwind the cable and insert the plug into a mains
socket.
- Press the on/off button.
Fig. 10: On - Off Switch
Stop
- Switch off the device and disconnect the plug.
- When pulling out the plug, always touch the plug,
not the cable.
8.2 Operating instructions
8.2.1 Suction and blowing function
The dry vacuum cleaner has 2 connections to which the
suction hose can be connected.
Suction function:
Insert the hose into the suction
connection (Fig.11, Pos A).
Blower function:
Insert the hose into the suction
connection (Fig.11, Pos.B).
Fig. 11: Suction and blowing function
8.2.2 Air regulation
The air flow can be adjusted or regulated at the end of
the hose by turning the air flow regulator.
Fig. 12: Air regulation
8.2.3 Filter cleaning system
The dry vacuum cleaner is equipped with a semi-auto-
matic filter cleaning system that can clean the filter from
dust and restore the suction power.
Step 1: Switch on the device.
Step 2: Insert the suction hose into the opening (Fig.13, Pos.
B).
Step 3: Press the filter cleaning button 3 times to clean the fil-
ter.
Fig. 13: Filter cleaning system
8.3 Seal inspection
Over time it is possible that the seals partially lose their
function. We recommend checking the locking hooks,
the flexible suction hoses and the seals for proper func-
tion at regular intervals.
Also check that the edges of the container are not dama-
ged.
B
