Cleanburn 14336, Руководство по установке

Страница: 17 / 32

Installer's Manual: Clean Burn Air Compressors
3-5
Preparing the Furnace Cabinet (Furnace Models Saturn 140 / 240)
1. Refer to Figures 3A and 3B.
2. Install all-thread rods through the mounting holes in the base and top of the furnace cabinet. Use double
nuts to securely lock the all-thread rods in position.
Mounting the Air Compressor (Furnace Models Saturn 140 / 240)
CAUTION: The compressor must be securely mounted as described in this section. Ensure that
all nuts and bolts are firmly tightened.
1. Refer to Figure 3A and 3B.
2. While facing the burner side of the furnace, install the air compressor on the front right all-thread rod
using the two U-bolts and nuts provided. Position the mounting bracket approximately two inches
above the top of the furnace cabinet.