7500-S Sediment Filter Installation & Startup Guide
Page 4
www.cleanwaterstore.com
Rev 083016
Maintenance:
Normal Operation
‐Normal service display alternates between service days, time of day and scheduled
rinsing time.
‐Days remaining until the next service will count down from the day value to 1 day
remaining.
‐Once the count reaches 1, a service cycle will be initiated at the next designated rinsing
time.
Troubleshooting the 7500 S Sediment Filter:
Backwash Flow Rate
One problem that may occur is if you do not have enough backwash flow rate to properly clean
the Sediment filter.
You can verify the backwash flow rate by running the drain line into a bucket and timing it when
the 7500 S is in Cycle 1 or backwash. A 1.0 or 1.5 cubic foot system should have 5 gallons per
minute and a 2.5 cubic foot system should have 10 gallons per minute of backwash.
