7500-S Sediment Filter Installation & Startup Guide
Page 4
www.cleanwaterstore.com
Rev 083016
Blue Clock-face Icon:
Indicates that the red digital display is showing the Current Clock Time.
Green Hourglass Icon
: Indicates the system is in normal Service (Filtering) Mode.
Blue Wrench Icon:
This indicates that you are in the programming menu and can change the
values.
Green Backwash Icon:
arrow pointing up, underneath a green bar. This indicates that you are
programming the Backwash step, or that the filter is in backwash.
Green Rapid Rinse Icon:
arrow pointing down above green bar. This indicates that you are
programming the Rapid Rinse step, or that the filter is in Rapid Rinse.
Dynamic Display Stripe:
On the left side of the digital display, there are eight bars that light up
from red to green in a “going up” pattern. When the valve is in Service Mode, you will see that
bar display flashing.
Sample Displays Showing Service Mode and Backwash and Fast (or Rapid) Rinse Modes:
Four Service Buttons:
Left to right, Menu/Confirm, Manual/ Return, Scroll Down, Scroll Up.
Up and Down Arrows
: When the Blue Key Icon is lit, press and hold both buttons to unlock.
When the Dynamic Display Stipe is blinking, pushing the up/down buttons has no effect.
When the Green Wrench icon is lit, pressing either up/down arrow will scroll through the menu
options.
Menu/ Confirm
Button (the button on the far left, an empty square with an arrow pointing
left): This is the button you press (after you have unlocked the screen) that puts you in the
Service Menu, so you can program the valve. The first time you press it, the Dynamic Display
Stripe goes away, and the Blue Wrench icon appears.
