BLX-200D Manual Page 3 of 9
Updated: 02/11/21
USER MANUAL: BLX-200D
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
Gener
al
Ins
talla
tion
Oper
ation
Appendix
Fig. 3.1: Verify level of bootscrubber at each end
Installing and Mounting the Unit
1.
Set unit in desired location.
2. Aspects to consider when deciding on placement:
•
Clearance for entering and exiting.
•
Traffic flow for unit operation.
• Emergency exit paths or egress in case of
emergency.
• Head room for personnel while using the
unit.
3.
Once the unit is in the desired location, use a
level to make sure the unit is stable and level in all
directions [Figure 3.1]. Make sure the location is a
flat surface.
4.
Using the 4 mounting brackets located at each
corner, securely fasten the unit to the floor with
appropriate hardware for the given material (i.e.
concrete anchors and bolts) as shown in [Figure
3.2]
Installation
Fig. 3.2:
Mounting bracket locations
WARNING
If not properly secured to floor the unit may tip
over and has the potential to cause personal injury.
