CLEAN COMFORT DV090, Инструкция по установке и эксплуатации

Страница: 7 / 20

INSTALLING DUCT COLLARS
IO-DV090 IO-DV090
WWW.CLEANCOMFORT.COM 7
Attach three white plates
using three #8 screws
provided to create a 10" plug
Attach the 10" plug to rear
of the dehumidifier using
six #8 screws
Attach the second 10" duct
collar as you did the first.
Using six #8 screws provided.
90° Flow
Step 3.
Choose desired orientation for
10 " diameter supply duct collar:
A. Straight through (180°) flow B. Upward, out of the top (90°) flow
Remove the 10" circular knock out from top panel
of dehumidifier using side cutters.
-OR-
Recycle three plates and nine extra screws.
These are only used for 90° flow option
.
180° Flow
Attach the second 10" duct collar as you did the first.
Use six #8 screws provided.
Ducting for Dehumidification
For the ideal installation, draw air from the central part of
the home and return it to the isolated areas of the home
like the bedrooms, den, utility room, or family room. Be
sure to utilize as many of these remote rooms as possible
and not just one location. The ductwork of the existing
HVAC system can be used to supply air to the home. If
the existing supply goes to isolated areas of the home,
discharge the supply from the DV090 into the supply duct
of the existing HVAC system. If the existing heating system
incorporates a central supply, installation of a separate
supply duct from the DV090 to each isolated area is
recommended.