Clean Air Edwardian Large, Руководство по эксплуатации и установке

Страница: 13 / 18

CHIMNEY INSTALLATIONS
Top of chimney
to be waterproof
CHIMNEY
- Fireplace inserts must be installed in a full masonry fireplace.
- Heater must be flued to the top of the chimney.
- Large model requires a minimum of 4.5 metres of flue.
Clean Air Woodheaters tested by HRL Technology Pty Ltd to comply with Australian Standards when
installed to enclosed dimensions.
Refer to AS/NZS 2918:2001.
Local council building approval may be required in some states.
STAINLESS
STEEL FLUE
SMOKE SHELF
(may need to
be removed
in some cases)
2 x 45° BENDS
Flue to be riveted
or screwed together
to prevent accidental
separation.
Place crimped end
down.
Flexible flue can be
used in situations
where the chimney
is not straight or
has a lot of bends.
1. Remove baffle plate
and pre drill hole in flue
spigot and stainless
steel.
2. Align holes and fix with
screw.
3. Flue to be fixed to
heater and sealed air
tight.
Page 13