background image

 

X-LARGE   

up to 1,000 square foot room 

LARGE  

 

approx. 500 square foot room 

MEDIUM   

approx. 400 square foot room 

SMALL  

 

approx. 300 square foot room 

X-SMALL   

approx. 200 square foot room 

 

Select Operation Mode 

They are three settings for fan speed:   
1. SUPER: This mode provides the strongest   

air exchange and cleaning function.    Use this   

function when odors are at their strongest. 
2. ECONOMY: This mode minimizes energy 

costs when the room is unoccupied. 

3. SLEEP: This mode is ideal for nighttime.    The   
sound level is at its lowest while cleaning the air.   

 
The UV Light Change 

The UV lamp and filter indicator are shown on   
the panel as the figure. 
1. “Green light” on means it is working well. 
2. “Yellow light” indicates the lamp needs to be replaced soon. 
3. “Red light” on indicates that the lamp needs to be replaced for better efficiency. 

 
Replacing the UV Lamp 

It is recommended that when the Yellow UV lamp indicator light is on, the ultraviolet lamp 
should  be  replaced  within  30  days.    When  the  Red  UV  lamp  indicator  light  is  on,  the 
ultraviolet lamp requires replacement. 
Step-by-step procedure: 

1).Unplug the power cord from the electrical outlet. 2). Using index fingers, squeeze the 
locking tabs inwards towards the center of the grill on top of the unit. Lift the grill up and 
remove  the  grill.  3).  Rotate the  UV  Lamp  one-quarter  turn, top-to-rear,  and  remove  the 
old lamp. 

   

                                                             

 
 
 
 
 
 
 

MODE 

 

SUPER 

 ECONOMY 

 SLEEP 

 

SELECT 

 

 

SERVICE 

☉ 

 

 

☉ 

 

 

☉ 

 

 

☉ 

 

 

Grill 

Содержание D2000

Страница 1: ...use 5 Always place the unit on a flat surface Do not place the unit too close to a heat source such as stoves radiators or any other heating devices Operation Instructions Placement of the Unit In order to obtain the maximum performance place your unit in a location that will not restrict airflow through either the air inlet or the air outlet Function Keys Operation Power on and off 1 Press POWER ...

Страница 2: ...re shown on the panel as the figure 1 Green light on means it is working well 2 Yellow light indicates the lamp needs to be replaced soon 3 Red light on indicates that the lamp needs to be replaced for better efficiency Replacing the UV Lamp It is recommended that when the Yellow UV lamp indicator light is on the ultraviolet lamp should be replaced within 30 days When the Red UV lamp indicator lig...

Страница 3: ... needle push the pin through the small hole in the RESET button on the SERVICE panel under the LAMP lights The lamplight will reset to green This action will inform the unit that new filters have been installed and the internal timer will be reset to zero Cleaning or Replacing the filters 1 Unplug the power cord 2 Place the unit on its back 3 Using a flathead screwdriver press in locking clip meta...

Страница 4: ... and plug in the power cord 6 Using a pushpin or needle push the pin through the small hole in the RESET button on the SERVICE panel under the FILTER lights The filter light will reset to green This action will inform the unit that new filters have been installed and the internal timer will be reset to zero SPECIFICATIONS DIMENSIONS INCHES 21 W X 8 D X 19 H WEIGHT 20 LBS MAXIMUM AIR VOLUME 260 CFM...

Отзывы: