Installation and Operation Manual
Everest
4
1-888-MY-AIR11 CAG-06-21-001 AtmosAir.com
04
EVEREST CONTROLS OVERVIEW
3
1
Switch On
2
Selecting an Operating Mode
Power Off
Press the power button to power on the device. The
device will continue in its last operating mode (not
including timer and sleep mode). Upon pressing the
power button, the device will enter into auto mode
automatically and begin to operate.
Note:
The machine includes a panel switch and
anti-fall switch. The machine will not turn on
when the panel is removed, or the machine has
fallen down.
All buttons disable once the child lock is pressed. The
icon will light up and keep running. Press and hold
this button for 3 seconds to enter or exit this mode.
Bi-polar ionizer will turn on/off when this button is
pressed. The icon will light on/off accordingly. When
pressing this button, the motor will turn on and stay
at low-speed mode.
Pressing the UV sterilizer button while the device
is running turns UV sterilizer on or off. An icon will
illuminate at the same time. When pressing this
button at standby mode, the motor will turn on and
stay at low-speed mode.
Pressing the auto button puts the device into
auto mode and an auto indicator displays on
the panel. With this mode, automated cleaning
begins based upon the degree of air pollution,
and the air volume will automatically adjust. Low
speed: PM2.5<60. Medium Speed: 60≤PM2.5 <150.
High-speed: PM2.5 ≥150.
Pressing the sleep button enables sleep mode and
the display panel and light will turn off. The motor
in this setting only works at low-speed. A timer
is available in this mode. The device will open in
standby mode once a timed setting finishes. Press
any button to exit sleep mode.
The speed button adjusts the motor speed between
Low (500 RPM), Medium (700 RPM), and High (900
RPM). It also lets the device exit auto mode. The
sensor does not automatically control motor speed.
Pressing the lock button for 5 seconds enables child
lock when the system is in normal working mode. It
will show the accumulated working time of the filter
and disappear after 3 seconds.
When the device is running, pressing the power
button will turn the device off.
To set the timer, press this button. Time will increase
by 30 minutes with each press. The time will recycle
after 12 hours. Press and hold for 3 seconds to exit,
and the device will go into standby mode. The device
will not be in purifying mode upon exit.
Auto Mode
Display Panel
Child Lock
Fan Speed Sleep Mode
Bi-Polar
Ionization
Timer Set
Power On/Off
UV Sterilizer
