Installation and Operation Manual
Everest
9
1-888-MY-AIR11 CAG-06-21-001 AtmosAir.com
09
CLEANING AND MAINTENANCE
4
Bi-Polar Ionization System
(Recommended Clean, as needed)
If the device produces a creaking sound, use a
brush pen as a cleaning tool. Regularly clean
dust around the bi-polar ionization system.
5
Particle Sensor
(Recommended Clean, every 2 months)
Please ensure the power is disconnected before
cleaning. Use a dry cotton swab to clean the lens
regularly to remove moisture and dust. Remove the
outer cover of particle sensor (Fig. 1). Use the dry
cotton swab to clean the lens (Fig. 2).
1
Pre-Filter
(Recommended Clean, every 15 days)
Use a vacuum cleaner to clean the dust
from the surface of the screen, or wash
with water and dry thoroughly.
2
Cellular-Activated Carbon Filter
(Recommended Clean, every 2 months)
Use a vacuum cleaner to clear the dust on
the surface of the screen. Place the filter
into a well-ventilated place. Do not expose
it to strong sunshine. Be gentle when
cleaning and touching the filter. Do not
use water to clean this filter.
3
Antibacterial/HEPA filter
(Recommended Clean, every 2 months)
Place the filter in a well-ventilated area
and do not expose it to strong sunshine.
Do not use water to clean this filter.
NOTE:
Be sure to disconnect the power before cleaning and maintenance. Do not open the device when filters have been removed. Please unplug
the power if the device will not be in use for an extended period of time. According to the use of places and methods (i.e., a household with smokers
or a place with serious pollution), the filter life will be shortened. In these instances, please replace the filter more frequently.
(Recommended Replace, every 12 months)
Never stare at or expose skin to UV light bulb
while the device is operating.
6
UltraViolet Sterilizer Bulb
