Installation and Operation Manual
Everest
8
1-888-MY-AIR11 CAG-06-21-001 AtmosAir.com
08
CARE & CONSIDERATION
1
If an odor or a burnt smell comes from the device,
immediately turn off the power button of the device
to avoid damage beyond repair.
2
Disconnect the power plug if the device will not be
used for an extended period of time.
3
Before maintenance, make sure to turn off the
power to the device to avoid any risk of electric
shock or injury.
4
Safely insert the plug into the socket for device use.
Do not use a damaged plug or loose power socket.
6
When any of the following occurs, immediately turn
off the device and contact an authorized AtmosAir®
Representative:
▪
A switch does not work
▪
The power cord or plug produces abnormal heat
▪
There is an abnormal sound or vibration
▪
Any anomalies or malfunctions that occur
5
Using the power cord to pull off
the plug from the power cord may
cause power cord damage, shock
hazard, short circuit, or damage
beyond repair.
Disclaimer:
The air purification technologies provided by Clean Air Group are
intended to improve indoor air quality. They are not intended as a
replacement for reasonable precautions aimed at preventing the
transmission of contaminants, airborne or otherwise. All persons
having access to the serviced premises should comply with applicable
public health laws and guidelines issued by federal, state and local
governments and health authorities such as the Centers for Disease
Control and Prevention (CDC). Clean Air Group does not maintain that
its products will protect people from all modes of transmission of
bacteria, viruses or other contaminants, and excludes liability for loss
or damage arising from any such claims or the consequences arising
out of the application, use or misuse of its products.
