Cleamix VCS-20Cr Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 29

Cleamix VCS-20Cr Скачать руководство пользователя страница 8

Cr 2021-02-01 vs. 2.3.

User Manual for VCS-20Cr

7

Incompatible products

Combustible materials. Copper alloys, galvanized iron. Strong reducing agents. Heavy
metals. Iron. Copper alloys. Contact with metals, metallic ions, alkalis, reducing agents and
organic matter (such as alcohols or terpenes) may produce self-accelerated thermal
decomposition.

PERSONAL PROTECTION

Protection of eyes, face and respiratory:

Whole face covering gas mask with category P3

NO-, CO-filter (EN143/14387).

Protection of hands:

Gloves made of butyl rubber, natural rubber, nitrile rubber, neoprene

rubber or fluoro rubber.

Protection of skin:

Protective full body suit. Compatible materials: (Viton®), Tychem® CPF

3, Tychem® BR/LV, Tychem® Responder® and Tychem® TK. (EN 14605 / category III / EN
14126 / class 6)

Pouring liquid hydrogen peroxide from the 20 litre canister into the 1 litre bottle

1. Safety

Make sure that you are wearing the proper safety wear: non-flammable clothing, rubber

boots, protective gloves and protective goggles.

Make sure that you have plenty of water available for rinsing in case the HP solution gets

spilled. It's a good idea to keep an emergency kit and eyewash pack nearby too.

2. Equipment’s

You will need a funnel with the maximum width of the funnel shaft of 4 cm to safely pour

the 50% hydrogen peroxide liquid solution from the 20 L canister into the 1 L bottle.

3. Pouring

Pour the HP solution carefully from the 20 L canister to the 1 L bottle with using the funnel.

When finished, make sure there isn't appearing any spilling of the HP solution. If so,

carefully dilute it with using plenty of water.

4. After

Make sure to close the caps properly and store again the HP

solution according the instructions.

«
...
6
7
8
9
10
...
»

Содержание VCS-20Cr






























Отзывы:

Нет отзывов