1
2
3
4
5
Fasten
A to wall with 4 screws
Attach
C to A and lock B to A , with fasten screws
Wire the cable and cover with
the waterproof rubber
Screw the two knobs
A
B
C
• Loudspeaker damage can be caused by amplifiers with too little power (wattage).
• An overdriven amplifier clips the waveforms and sends distortion to the speakers.
• Clipping is usually audible; it may vary from a harsh sound to a fuzzy or unclear sound.
• If you hear this condition at loud volume levels, turn down the volume until the distortion
is no longer present.
• Damage caused by operating the speakers at distorted volume levels is not covered by the warranty.
