NOTE: The total number of speakers multiplied by the tap value cannot exceed the output power (in watts)
of the 70/100v amplifier. The above example shows 5 total speakers. Using the 16W taps, you will need an
amplifier with at least (5) x (16) = 80W. A good rule of thumb is to select an amplifier with 20% greater power;
in this case, an amplifier that delivers about 100W.
www.cie-group.com
Example 70/100v System
Configuration
Specifications
Frequency Response
(-10dB)
60Hz ~ 20KHz
Sensitivity (1W/1M)
90dB
Impedance
8
W
RMS power
60W
Peak power
120W
Transformer taps
70v:
32-16-8-4-2-1W
& 8
W
100v:
32-16-8-4-2W & 8
W
IP protection rating
IP56
Dimensions (mm)
190(W) x 256(H) x 225(D)
Weight (Net)
2.5kg
Underpowering vs Overpowering
Observe correct Polarity for maximum
Bass performance
LEFT
RIGHT
2 SPEAKERS PER CHANNEL CONNECTED IN
PARALLEL
2 Channel Amplifier with 8
W
output
70V/100V
C
5 SPEAKERS CONNECTED IN PARALLEL USING 16W TAPS
WSP60 Speakers
