Lithium Power Supply User Manual
Page
5
2. General information
When the LPS is not used for longer periods of time it must be stored fully charged and recharged every 6
months
ATTENTION: Read the safety instructions before installing the Lithium Power Supply.
ATTENTION: When installing the lithium Power Supply, do not mount it upside down or on the sides. Do not
cover or block the fan or the air inlet to insure the battery does not overheat.
Mounting holes are for pre-fixation, suitable fixation has to be added.
ATTENTION: Do not connect the Lithium Power Supply in series or parallel.
ATTENTION: Make sure the Lithium Power Supply is powered down before starting the installation
The LPS is designed for indoor, household and industrial use.
2.1. Transport
The Lithium Power Supply is classified as Class 9 hazardous material UN3480 and tested according to
UN 38.3. Transport of the Lithium Power Supply must always be in original certified packaging.
The transport of Lithium Power Supply must only be handled by trained people in accordance to ADR, RID
and IMDG. For transport by air (IATA) the packaging has to be in accordance to P965, here the original
packaging complies.
For shipment of defect batteries, contact your retailer for further information.
2.2. Disposal
Batteries marked with the recycling symbol must be processed via a recognized recycling agency. By
agreement, they may be returned to the manufacturer. Batteries must not be mixed with domestic or
industrial waste.
NON-
SPILLABLE
LI-ION
BATTERY
