BAG FILTER CHANGE
Repair or Warranty Contact
Clayton Associates, Inc.
•
1650 Oak Street
•
Lakewood, New Jersey 08701
•
P.+1-732-363-2100 F.+1-732-364-6084
www.DustlessMadeSimple.com
•
Page 8
If this vacuum is used to collect hazardous material, please use the Safe Filter Change section
The bag filter should be replaced when ¾ full
1. Safe the Vacuum
• Move the vacuum to a non rated area
• Disconnect the compressed air source from the vacuum
• Disconnect the grounding cable
• Disconnect the vacuum hose
2. Remove the Inlet Cap and Bag
• Rotate the inlet latch 1/4 turn counter clockwise
• Grasp the inlet cap and remove by tilting the bottom out and then pulling down
3. Remove the Filter Bag from the Inlet Cap
• Hold the Inlet Cap in your left hand
• Grasp the bag with your right hand and pull while twisting
• Dispose of the bag according to your company policy
4. Install a Filter Bag
• Unfold a new Filter Bag
• Push the inlet tube into the hole on the cardboard collar of the Filter Bag
• Ensure the cardboard collar is flush against the inside of the inlet cover
5. Reinstall the Inlet Cap
• Replace the Inlet Cap
• Press the latch in and rotate 1/4 turn clockwise to lock
Inlet Latch
Remove the Inlet Cap and Bag
Remove the Filter Bag from Inlet Cap
Inlet Cap
Bag Filter
