Copyright © 2012 Clayton Associates Inc.
6
Safe-Filter-Change
™
WARNING: It is imperative that the operator perform the following Safe-Filter-Change™ procedures in order to
ensure that neither the operator nor the environment are exposed to potentially hazardous dust.
Changing the Cyclone Waste Bag in DM-300 & 304 Vacuums. If you do not have a cyclone separator on your
vacuum, skip this section.
Also applies to DM-100 & 104 vacuums retrofitted with a cyclone separator PN 682-A100
Clayton recommends the use of HEXOFF Surface Decontamination Cleaner to wipe down vacuums and
tools to remove traces of Hexavalent Chromium and heavy metals. Hexoff is manufactured under
license from the Center for Disease Control, and has been proven to remove hexavalent chromium at
the microscopic level.
PN 415-SC01Q
Hexoff Surface Decontamination spray (1 QT bottle)
PN 415-NR045
Hexoff No Rinse Wipes (45 count canister)
PN 415-NR800
Hexoff No Rinse Wipes (800 count tub)
Safe-Filter-Change™ Procedure for the Cyclone Collection Bag.
1.
Connect the shop air supply to the vacuum but
do not start
the vacuum at this time.
Unlatch the front door to the Cyclone Waste Compartment
and open it slowly.
2.
Wearing impermeable gloves gently slide the waste bag down
from the fill tube.
Lower it just enough to prevent it from being sucked into the
tube when the vacuum is turned on.
