2.1 Intended use
The CLP 600 booster has been developed for permanent installation in
vehicles for charging additional batteries (lead and lithium). The device may
be used in both 24 V and 12 V vehicle power circuits and charges batteries with
nominal voltages of 12 V and 24 V. The emergency start function allows the
starter battery to be charged briefly (max. 5 min.) from the additional battery
to enable the vehicle to start.
At the output, the unit supplies a DC voltage of 14.4 V or 28.8 V, depending on
the charging characteristic, and thereby supplies consumers with power per-
manently or for a short time. The input voltage is 12 V or 24 V.
The device is designed for an operating temperature of -25°C ... +80°C.
2.2 Foreseeable misuse
The device is designed for interior use only. Do not mount the device outside
the vehicle.
5
LEAB Automotive GmbH
Thorshammer 6
24866 Busdorf
LEAB Automotive GmbH
2 General Safety
