LED
Status
Description
IN/OUT 12 V and 24
V
Green, steady light
Automatic input voltage detection
active
IN/OUT 12 V or 24 V Red, flashing
Input voltage too low / too high
10 Emergency Start Function
To activate the emergency start function, perform the following step:
ü
A wake-up signal (Ignition switch, terminal 15) is applied to the device.
1. Press the jump start button for 3 seconds.
ð
The starter battery is charged for a maximum of 5 minutes from the
auxiliary battery. The jump start LED (emergency start) flashes green. Do
not start the vehicle yet.
ð
The jump start LED (emergency start) is lit green. The starter battery is
charged, you can start the vehicle.
To end the emergency start function, perform the following step:
2. Press the jump start button.
ð
The emergency start function ends, the charge booster returns to normal
operation.
11 Disposal
Dispose of the device in accordance with the Waste Elec-
trical and Electronic Equipment Regulations (WEEE).
The system must not be disposed of with household
waste. Take it to a recycling point or send it to your point
of sale.
12 EU Declaration of Conformity
The The CLP 600 charge booster from Clayton Power com-
plies with the requirements of the following directives:
– 2014/30/EU: EMC
– 2011/65/EU: RoHS
13
LEAB Automotive GmbH
Thorshammer 6
24866 Busdorf
LEAB Automotive GmbH
12 EU Declaration of Conformity
