Clavia NordStage2 EX 88, Руководство пользователя

Страница: 43 / 60

and reverts back to slow when the pedal is released. Rotor Toggle
means that the fast/slow rotor speed is switched with each pedal
depression, like an on/off switch pedal.
Range: Latch, Rotor Hold (default), Rotor Toggle
Ctrl Pedal Type
The Stage 2 EX accepts many of the most commonly available control
pedals the Ctrl Pedal input. Select a setting here that matches the
pedal that you use.
If you operate a connected pedal while this option is active, a
percentage will be displayed from 0 to 100 to indicate the range
of the connected pedal. This can be used to find a suitable setting
for a pedal this isn’t directly supported.
Range: Roland EV-5, (default) , Roland EV-7, Yamaha FC-7, Korg
(EXP-2 & XVP-10), Fatar (& Studiologic VP/25)
Control Pedal Gain
This setting allows you to add some gain to the output of the pedal.
This can be used if an attached pedal does not reach the maximum
level or setting.
Range: 1 - 10
Control Pedal Func
This setting determines the functionality of a pedal that is attached to
the Control Pedal input. The three settings are: Ctrl (use this to use
the pedal with the Morph functionality), Ctrl + Swell (combines Morph
control and Organ Swell) and Ctrl + Volume (combines Morph control
and the main volume of the Stage 2 EX).
Range: Ctrl (Default), Ctrl + Swell, Ctrl + Volume
Swell Pedal Type
This setting configure the Swell Pedal. See “Ctrl Pedal Type” above for
details.
Range: Roland EV-5, (default) , Roland EV-7, Yamaha FC-7, Korg
(EXP-2 & XVP-10), Fatar (& Studiologic VP/25)
Swell Pedal Gain
This setting allows you to add some gain to the output of the pedal.
This can be used if an attached pedal does not reach the maximum
level or setting.
Range: 1 - 10
Swell Pedal Func
This setting configure the Swell Pedal destination. Set this to Swell if
you want this pedal to act as a Swell pedal for the organ, or to Volume
if it should control the volume of all the Stage 2 EX instruments.
Range: Swell (Default), Volume
Memory Protection
This is set to “On” when Nord Stage 2 EX leaves the factory, meaning
that you cannot save any changes to Programs or Synth Sounds. Set
this to Off if you wish to store your own Programs. Menu settings and
the five Live buffers are not protected by this setting.
Range: On (default), Off
Sound Menu
Hold Shift and press Program 2/Sound to access the Sound menu
settings. Use the Page
3
and
4
buttons to navigate between the vari-
ous menu items on the Sound menu. The Value Dial is used to change
settings. When you are done, press Exit (Shift) to exit the menu.
Organ Key Click Level B3
This sets the level of the Key Click for the B3 organ model.
Range: Low, Normal (default) High
Organ Tonewheel Mode
Sets the level of tonewheel crosstalk and cable leakage artifacts of the
B3 organ model.
Range: Clean, Vintage1 (default), Vintage2
Piano Pedal Noise Level
Sets the level of the Pedal Noise that can be turned on for selected
pianos, if a Nord Triple Pedal is connected to the Stage 2 EX.
Range: +/- 6 dB (0 dB default)
Piano String Res Level
Sets the level of the String Resonance feature that can be turned on for
selected pianos (acoustic Med, Lrg and XL sizes).
Range: +/- 6 dB (0 dB default)
Synth Vibrato Rate
This determines the rate of the Synth Vibrato.
Range: 4.00 - 8.00 Hz (Default 6.00 Hz)
Synth Dly Vibrato Amount
This determines the amount of Synth Vibrato when any of the vibrato
delay modes are used.
Range: 0-50 cent (Default value is 25 cent)
FX Rotary Speaker Horn Speed
This determines the speed of the rotary speaker treble horn.
Range: Low, Normal (default) High
FX Rotary Speaker Horn Acc
This determines the acceleration and retardation time of the rotary
speaker treble horn.
Range: Low, Normal (default) High
FX Rotary Speaker Rotor Speed
This determines the speed of the rotary speaker woofer rotor.
Range: Low, Normal (default) High
FX Rotary Speaker Rotor Acc
This determines the acceleration and retardation time of the rotary
speaker woofer rotor.
Range: Low, Normal (default) High
Chapter 11 MeNUS | 43