Clavia Nord Wave 2 Скачать руководство пользователя страница 24

24 |  nORD WaVe 2 USeR ManUal OS V1.0x

aMPlIfIeR enVelOPe

The amplifier envelope (

AMP ENV

) is used for controlling how the sound 

level

 changes over time. By modulating the amplifier with an envelope, 

the sound can be given its basic profile and evolving character. In fact, 
the “volume shape” is one of the most important factors to how we 
identify the sound. By setting up a proper amplifier envelope you can 
make a sound “soft”, “hard”, “plucked” “static” etc.

 

Press the 

MONITOR

 button and turn one of the envelope controls to 

see a graphic representation of the envelope! 

aTTacK

attack is the time it will take for the envelope to go from zero to the 
maximum amplitude as soon as a key have been pressed.

 

A very short attack time could produce a click in the beginning of 
the sound. To eliminate this, increase the attack time slightly.

TRanSIenT

TRANSIENT

 (Shift + attack knob) adds a short transient spike to the 

onset of the attack phase. The sound level of the transient decreases 
gradually between the 0 and 2 settings of the knob. The 2 setting of the 
knob corresponds to 0 attack in non-Transient mode.

DecaY

Decay is the time it takes for the envelope to drop down to the sustain 
level after the attack phase has been completed.

 

If Sustain is set to the maximum level, a Decay time will have no 
effect since the envelope “is already” at the Sustain level.

SUSTaIn

Sustain is the level the envelope will reach after the decay phase has 
been completed. When the envelope has decayed down to the sustain 
level, it will stay at this level until the key is released. With a sustain set-
ting of zero the envelope will drop down to zero during the Decay phase 
of the envelope.

 

M

The Sustain parameter is used to set a level, while Attack, Decay 
and Release parameters are all used to set times.

decay (time)

release (time)

key down

key up

attack (time)

Sustain
(level)

Amp & filter ADSR envelopes 

time

 

amount

key down

attack (time)

Amp & filter envelopes 2

time

 

amount

key down

Decay

decay (time)

attack (time)

time

 

amount

decay (time)

key down

attack (time)

Sustain
(level)

Sustain

time

 

amount

Содержание Nord Wave 2









































Отзывы: