Nord Stage EX v6.x
5. The Program section: Storing Programs
Page 21
N
AMING
A
P
ROGRAM
To name a program, proceed as follows:
1. Hold down
S
HIFT
and press the
S
TORE
A
S
...
button once. The
S
TORE
button indicator starts
blinking, and the
D
ISPLAY
will read “Set Name”.
2. Now use one of the following methods to name your Program:
• You can move the cursor position left or right in the
D
ISPLAY
by using the
P
AGE
-/+
buttons.
• When the cursor is at the position where you want to enter/change a character, you can use the
V
ALUE
D
IAL
to scroll through all available characters (a-z.A-Z, 0-9, Space and “-”).
• By holding down
S
HIFT
and pressing the
I
NS
(P
AGE
+)
button, you enter a blank step at the cursor
position.
• By holding down
S
HIFT
and pressing the
D
EL
(P
AGE
-)
button, you erase the character at the cur-
sor position.
• Alternatively, you can press and hold down the
KB Z
ONES
2
OR
3
button. This will bring up the
characters in the
D
ISPLAY
with the focus on the character the cursor was last on. You can now use
the
V
ALUE
D
IAL
to select a character at the current cursor position. When you release the
KB
Z
ONES
button the cursor automatically moves to the next position.
3. Press
S
TORE
again. Now you can use the same methods as outlined in “Storing a Program”
above to store your name with the Program.
