Commissioning
1. Fully unwind the mains cable.
2. Fit on a nozzle. You can dry single hair locks by concentrating the flow of hot air
with the hairdressing nozzle. The diffuser is the ideal solution to dry curly hair
without losing volume.
3. Only connect the machine to a properly installed safety socket, 230 V/50 Hz.
4. Setting the Temperature Level (right switch):
Position 1:
cold air
Position 2:
medium temperature for gentle drying and shaping
Position 3:
high temperature for rapid drying
Setting the desired blower strength (left switch):
Position 0: OFF
Position 1: gentle stream of air
Position 2: strong stream of air
COOL-Shot:
With this switch it is possible to interrupt the heating
process so that the air can be mixed according to individual
requirements.
TURBO button:
By pressing the turbo button you can increase the air current
even further.
Cleaning and care
Clean the air suction opening from time to time with a fine brush. Clean the hou-
sing with a soft, dry cloth without additives.
Removing the air suction cover
Remove the cover after turning the cap through approximately 30 degrees against
a clockwise direction. Remove the intake filter and clean under running water. Dry
the filter well before mounting again!
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
21
GB
5....-05-HTD 2832 03.09.2003 10:23 Uhr Seite 21
