GB
41
Symbols in these Instructions for Use
Important information for your safety is specially marked. It is essential to comply with these
instructions in order to avoid accidents and prevent damage to the machine:
WARNING:
This warns you of dangers to your health and indicates possible injury risks.
CAUTION:
This refers to possible hazards to the machine or other objects.
NOTE:
This highlights tips and information.
Overview of the Components
1 Cutting lever
4 Blade
2 Charging contacts
5 Toothed wheel
3 Battery compartment
6 Lid magnet
Instructions for Use
The can opener can be used to open different shaped cans quickly and easily.
• Round cans are the most suitable.
WARNING:
Do not open any cans that are under pressure!
Wall Installation
The charging station can also be installed on the wall. Please remember however that there
must be an electric socket close by.
• To do so, measure the distance between the recesses on the back and drill two holes at
this distance for the rawlplugs.
CAUTION
:
Please ensure beforehand that you will not be damaging any electrical wiring or pipes
hidden in the wall!
Preliminary Cleaning
Before using the device for the fi rst time you should clean it in order to remove any residues
from the production process. Please follow the instructions contained in the „Cleaning“
section.
05-DO 3204.indd 41
05-DO 3204.indd 41
17.09.2007 15:36:04 Uhr
17.09.2007 15:36:04 Uhr
Консервный ключ на батарейках CLATRONIC DO 3204
В интернет-магазине
www.clatronic-shop.com.ua