Clatronic CL 3750, Инструкция по эксплуатации

Страница: 44 / 78

44
CL3750_IM_neu 18.12.2019
Notes for Use
CAUTION: Important for initial operation or after transport!
Before initial operation, the appliance must stay in an upright position for
at least 3 hours in order for the cooling agent to sink. The compressor
will be damaged otherwise.
CAUTION:
• When you interrupt the operation with the POWER button, wait for
at least 3 minutes before switching the appliance on again.
• If you want to move the appliance to another location, first empty the
water tank!
• The appliance operates most effectively with a room size up to 70 m³.
• The flexible exhaust hose and the adapter have been manufactured
especially for this appliance. In order to avoid incorrect operation, do
not replace the pipe with another pipe.
• The exhaust pipe can be extended up to 150 cm. Do not use any
extension.
• Ensure free airflow. Make sure not to kink or bend the exhaust pipe.
Any blockage can cause the appliance to overheat.
• Close all windows and doors in order to prevent outside air from
entering the room and thus allowing a more effective operation of the
appliance.
Putting into Service
Location
• When installing the appliance, make sure to keep a distance of at least
50 cm between the appliance and any walls or other objects.
• The surface must be flat and dry.
Assembly of Exhaust Pipe
NOTE:
For sliding windows or external roller blinds you may use the supplied
window exhaust air kit in a vertical or horizontal orientation. Adjust the
length of the seal plate as desired.
1. Connect the adapter to the exhaust hose. Place the exhaust hose in a
way that the first fin of the hose lays in the rail. Tighten the adapter by
turning it clockwise.
2. Connect the adapter to the connector on the back of the appliance. To
do this, position the exhaust air hose with the adapter in such a way
that the label on the adapter is facing up. Turn the adapter all the way
towards LOCK .
3. Extend the pipe to the desired length.
4. Screw the window exhaust air kit adapter onto the end of the exhaust
air hose.
5. Stick the open end of the pipe into a window.
6. Close the window as far as possible. Also lower any external roller
blinds, if present, to the end of the pipe.
Remote Control
1. Open the battery compartment cover on the back of the remote control.
2. Insert 2 batteries of type R03 “AAA” 1.5 V, observing the correct polarity
(see markings on the bottom of the compartment)!
3. Close the battery compartment cover.
Power Cord
Unwind the power cord from the winding appliance.
Electric Connection
1. Make sure the mains voltage you want to use corresponds to the
voltage of the appliance. Please check the rating label for detailed
specifications.
2. Connect the appliance to a properly installed grounded socket. A signal
will sound indicating that the appliance is ready for use. The appliance
is in standby. The display shows the current room temperature.
Turning Appliance On / Off
• Press the POWER button to turn on the appliance. The pivoting flap
is opened automatically. The appliance is pre-set to “Cooling” mode
and the temperature is 22 °C. If operation has been stopped without
disconnecting the plug, all previously set operating mode and tempera-
ture settings will be retained. The control lamps indicate this setting.
• Press the POWER button again to turn off the appliance. The pivot -
ing flap is closed automatically.
Compressor Safety Appliance
If operation is interrupted, the safety appliance for the compressor is acti-
vated. This prevents operation of the compressor for approx. 3 minutes, in
order to relieve the pressure in the cooling circuit. This is not a malfunc-
tion of the appliance. Therefore, wait at least 3 minutes, before switching
the appliance on again.
Information on the App “Smart Life - Smart Living”
The Smart Life - Smart Living app is available for android and iOS.
Scan the corresponding QR code to get directly to the download.
NOTE:
Depending on the provider, there may be costs involved in downloading
the app.
Google Play App Store
Information on How to Use the App
This appliance allows you to operate the appliance via your home net -
work. A prerequisite is a permanent Wi-Fi connection to your router and
the free app “Smart Life - Smart Living”.
You can easily access all functions of the appliance via the app. Since the
app constantly improved, we cannot provide a more detailed description
here.
We recommend disconnecting the appliance from the power supply when
you are away from home to prevent unintentional switching on while you
are on the road!
System Requirement for Use of the App
• iOs 8.0 or higher
• Android 4.4 or higher
Commissioning via the App
1. Install the “Smart Life - Smart Living” app. Create a user account.
2. Activate the Wi-Fi function in the settings of your appliance.
3. Place the air-conditioning appliance within a distance of around 5 me-
ters of your router.
4. Press and hold the FAN SPEED button for about 5 seconds. The
Wi-Fi indicator light flashes rapidly.
5. Launch the app and select “ + ”.
6. Select the “air conditioner” menu and follow the instructions on the
display.
7. Once the appliance has been connected successfully, the Wi-Fi
indicator light will be solid. Now you can operate the appliance using
the app.
NOTE:
• The appliance can only be operated with 2.4 GHz routers. 5 GHz
routers are not supported.
• The appliance is equipped with only one network connection. It can -
not be turned off.