ENGLISH
73
NOTE
If no information is available
►
NO CLOCK
or
NO PTY
is
displayed.
Setting the time manually
If the time should not be set automatically, proceed as follows:
Press the button
DSP
(10) for a short while until the time ap-
pears on the display.
Now keep the button
DSP
pressed until the minutes flash.
Turn the multi-controller (3) to make the setting.
Press the button
DSP
for a short while. The hours start
flashing.
Turn the multi-controller (3) to make the setting.
Reset Radio
To reset the unit to default settings press
RESET
(4) with a pointed
object, i.e. pen.
Reset the unit when:
using it the first time after all cabling is done,
■
malfunctions of buttons occur,
■
error messages are displayed.
■
Radio Functions
Set RADIO Mode
Repeatedly press
MODE
(21) until frequency and band are
displayed.
Select Frequency Band
Press
BND/LOU/ENT
(7) to toggle between FM1, FM2, FM3
and AM. The selected frequency band is displayed.
Auto Search
Press
(26) or
(27) to start auto search,
SEARCH
is displayed. Search stops if a station is found.
Manual Search
Press and hold
(26) or
(27) until
MANUAL
is
displayed.
Press
(26) or
(27) to step through the FM
frequency band in steps of 0.05 MHz and 9 kHz for AM until
the desired frequency is displayed.
After two seconds idling the unit returns to auto search. The display
shows
AUTO
.
Save Station
For each frequency band 6 station presets are available.
Press and hold the desired numeric button (17) approx. 2
seconds to save the current station. A beep can be heard after
successful storage (except setting to
BEEP OFF
).
Access Saved Station
Press
BND/LOU/ENT
(7) to select the desired frequency
band.
Press one of the numeric buttons (17) to access the respective
station.
Auto Save
Press
BND/LOU/ENT
(7) to select the desired frequency
band.
Press and hold
AS/PS/D-AUD
(22).
SEARCH
is displayed.
The unit starts automatic search. With search, the first 18 sta-
tions are checked. The respective preset flashes.
Press one of the numeric buttons (17) to access the respective
station.
Cycle Through Saved Stations
Press
AS/PS/D-AUD
(22). All stations are briefly played in
sequence.
Press
AS/PS/D-AUD
(22) when the desired station comes
up. This station stays tuned into.
Содержание AR 815 USB/CR
Страница 96: ...96 J ZYK POLSKI...
Страница 97: ...97 J ZYK POLSKI...
Страница 98: ...Stand 12 10 D 47906 Kempen Germany Industriering Ost 40 Internet http www clatronic de email info clatronic de...