Classique CLFG95SS, Руководство пользователя, Страница: 17 / 31

17/EN
DANGER:
Do not use open flame or do not smoke.
Do not operate any electrical buttons (e.g.
lamp button, door bell and etc.)
Do not use fixed or mobile phones.
Risk of explosion and toxication!
DANGER:
The gas hose must not be clamped, bent or
trapped or come into contact with hot parts of
the product.
There is the risk of explosion due to damaged
gas hose.
• Push the product towards the kitchen wall.
• Adjusting the feet of oven Adjusting the feet of oven Adjusting the feet of oven Adjusting the feet of oven
4 feet are supplied together with your oven.
Each foot must be installed into respective slots
located at 4 corners under the oven.
Screw the thread of the foot by turning in
clockwise.
For your safety, make sure that they are level
when screwing all 4 feet. Unbalance of the legs
has negative influence on cooking.
1 Foot
2 Foot slot
For products with cooling fan
1 Cooling fan
2 Control panel
3 Door
The cooling fan cools both the control panel and the
front of the appliance.
Cooling fan continues to run for up to 20-30
minutes (approx.) even after the oven is turned
off.
Final check
1. Reconnect the product to the mains.
2. Check electrical functions.
3. Open gas supply.
4. Check gas installations for secure fitting and
tightness.
5. Ignite burners and check appearance of the flame.
Flame must be blue and have a regular shape.
If the flame is yellowish, check if the burner
cap is seated securely or clean the burner.
Gas conversion
DANGER:
Before starting any work on the gas
installation, disconnect the gas supply.
There is the risk of explosion!
In order to change your appliance's gas type, change
all injectors and make flame adjustment for all valves
at reduced flow rate position.
Exchange of injector for the burners
1. Take off burner cap and burner body.
2. Unscrew injectors by turning the counter-
clockwise.
3. Fit new injectors.