Classique CLFG95SS, Руководство пользователя, Страница: 14 / 31

14/EN
• The appliance corresponds to device class 1, i.e.
it may be placed with the rear and one
one one one side to
kitchen walls, kitchen furniture or equipment of
any size. The kitchen furniture or equipment on
the other
other other other side may only be of the same size or
smaller.
• Any kitchen furniture next to the appliance must
be heat-resistant (100 °C min.).
Safety chain
The appliance must be secured against overbalancing
by using the supplied two safety chains on your oven.
Fasten hook (1)by using a proper peg to the kitchen
wall (6) and connect safety chain (3) to the hook via
the locking mechanism (2).
1 Stability hook
2 Locking mechanism
3 Safety chain (supplied and mounted to oven)
4 Firmliy fix chain to cooker rear
5 Rear of cooker
6 Kitchen wall
Stability chain to be as short as practicable to
avoid oven tilting forward and diagonal to avoid
oven side tilting.
Cooker stability chain for cookers not designed with
bracket engagement slot.
Room ventilation
All rooms require an openable window, or equvalent,
and some rooms will require a permanent vent as well.
The air for combustion is taken from the room air and
the exhaust gases are emitted directly into the room.
Good room ventilation is essential for safe operation of
your appliance. If there is no window or door available
for room ventilation, an extra ventilation must be
installed.
The appliance may be located in a kitchen,
kitchen/diner or a bed-sitting room, but not in a room
containing a bath or shower. The appliance must not
be installed in a bed-sitting room of less than 20m
3
.
Do not install this appliance in a room below ground
level unless it is open to ground level on at least one
side.