background image

5

WARNING Read Before Assembly

Storage Instructions

WARRANTY 

•  The cab will NOT protect against noise, 

engine exhaust, chemicals, collision, roll-over 
or other accidents.

•  NEVER operate any snow thrower in a 

confined area without ventilation.

•  Operating a snow thrower with this cab 

will restrict your field of vision.

•  The cab adds height to your snow thrower 

so watch carefully for tree limbs or other 
items overhead that you could previously 
go under without a cab.

•  NEVER use your snow thrower and cab 

without the sand bag counterweight. 
The cab adds weight to the handlebars 
and without the counterweight you could 
tip your snow thrower.

Store in a clean dry place. Never store a wet 

cover in an enclosed area as it can become 
mildewed.

Avoid folding the plastic windows of the 

cover for long periods.

Your Classic Deluxe Snow Thrower Cab 

is factory warranted for workmanship and 
materials for two years from the date of 
purchase.

This warranty assumes normal use and 

conditions and does not include rental use.

ALWAYS remove the cover before transporting 

your snow thrower on a truck or trailer. Use 
during transportation will invalidate your 
warranty.

Periodically check all bolts to see that they 

are tight. If one or more bolts come loose, 
failure of cab parts may occur.

Don't clean the plastic windows when they 

are dry—you can scratch them.

The best way to clean your windows is to 

hose them with water and rub them with your 
bare hands. Liquid soap may be used.

During freezing weather an automotive 

windshield solvent and a soft cloth will work 
(don't use your bare hands with the solvent).

Fabric areas of the cab may be washed 

with a rag. Don't use soap as it may remove 
protective coatings added by the factory.

IMPORTANT Maintenance Instructions

22640 68th Ave S. 

Tel: (253)395-3900

Kent, WA, USA 98032 

Fax: (253)395-3991

Email: [email protected] 

Classic Accessories, Inc

Содержание Deluxe Snow Thrower Cab















Отзывы: