Classe Audio OMEGA - V1.1, Руководство пользователя

Страница: 7 / 30

7
ventilation Your Classé Omega Mono generates a certain amount of heat in the
course of normal operation. Be sure to allow six inches of clearance
above it and three inches to each side to allow heat dissipation through
air circulation. The vents on the bottom, front and back of the Omega
Mono must be kept free from any obstruction which would reduce the
flow of air through the unit. Avoid placement on soft surfaces that
would restrict airflow (such as plush carpeting).
custom installations Drawings are included in this manual to facilitate special installations
and custom cabinets (see the section
Dimensions ).
serial number The serial number for your Omega Mono power amplifier is found on
the rear of the unit. Please note and record this number on the page en-
titled
Important Safety Instructions for your future reference.
register your purchase! Having found the serial number, now would be a good time to fill out
the registration card. Please register your purchase so we can advise you
of updates and other items of interest.
It will take only a minute or so. Please complete the card now, before
you forget.
please read this manual… Please take a few minutes to review this manual, and to familiarize
yourself with your new amplifier. We understand that you are anxious to
plug everything in and get started. However, reading this manual and
following the advice it gives will ensure that you get all the benefits you
deserve from having purchased such a fine piece of equipment.