Classe Audio CDP-88, Руководство пользователя

Страница: 7 / 19

7
DISPLAY, FUNCTIONS AND OPERATIONS
1. FUNCTIONS:
The front panel of the CDP-88 has six buttons that perform all the basic necessary functions.
The remote control contains all the basic functions found on the front panel (except the LOAD button)
as well as all advanced programming features.
Using Figure 1 on page 10, the front panel controls are (from left to right):
LOAD : Press this button once to open the disk tray. Pressing it again will close the tray.
STOP : Stops playing the disk, and also clears all programs in memory.
PREVIOUS ( ½ ) : Pressed once during playback, the CDP-88 will start playing the previous track.
Pressing it sequentially will cause the CDP-88 to go back one track each time it is pressed. This button
is also used to select tracks to play and program into memory.
PLAY/PAUSE : Press this button to start playback. Pressing it again will pause the music until it is
pressed once more.
NEXT ( ¾ ) : Each time this button is pressed, the CDP-88 will advance one track i.e. press it twice to
advance two tracks, three for three tracks, etc. If pressed during playback, the CDP-88 resumes playing
from the desired track. If pressed while stopped, the CDP-88 will await further commands.
STANDBY : This is the "power switch" of the CDP-88. Press it to turn the CDP-88 on and off.
In addition to all the above functions, the remote handset of the CDP-88 contains the following
additional functions (see Fig.2 on page 11):
NUMERIC KEYPAD (digits 0 through 9) : This is a convenient alternative to the PREVIOUS and
NEXT buttons. Pressing the desired track number on the numeric keypad is usually faster than the
PREVIOUS and NEXT buttons. For example, if you just inserted a disk and wish to play track 8,
pressing 8 followed by PLAY is easier than pressing the NEXT button eight times, and then PLAY.
REPEAT : Repeats the whole disk, the programmed tracks or just the single track being heard.
SCAN : Plays the first ten seconds of each track.
SHUFFLE : Plays all tracks on a disk in random order.
STORE : Stores selected tracks into memory for playback.