CLAS OH 7014 Скачать руководство пользователя страница 14

OH 7014

EXTRA FLAT TROLLEY JACK 3T 75mm

CARACTERISTIQUES

WARNING INFORMATION

Lifting 

Capacity 

(Ton)

Max. Height 

(mm)

Min. Height 

(mm)

Gross Weight 

(kg)

Net Weight 

(kg)

Package Size 

(mm)

3

510

75

32

30.5

777X383X200

Standards: 2006/42/EC, EN 1494 :2000+A1 :2008

Product lifetime : 800 use

 

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. 

Obey all safety messages that follow this symbol to avoid possible injury or death.

WARNING: 

Indicates a hazardous situation which, if not avoided, could result in death or serious 

injury.

BEFORE USING THIS DEVICE, READ THIS MANUAL COMPLETELY AND THOROUGHLY, 

UNDERSTAND ITS OPERATING PROCEDURES, SAFETY WARNINGS AND MAINTENANCE 

REQUIREMENTS.

 

 IMPORTANT: 

READ THESE INSTRUCTIONS BEFORE OPERATING

It is the responsibility of the owner to make sure all personnel read this manual prior to using 

the device. It is also the responsibility of the device owner to keep this manual intact and in a 

convenient location for all to see and read. If the manual or product labels are lost or not legible, 

contact the manufacturer for replacements. If the operator is not fluent in English, the product 

and safety instructions shall be read to and discussed with the operator in the operator’s native 

language by the purchaser/owner or his designee, making sure that the operator comprehends its 

contents.

THE NATURE OF HAZARDOUS SITUATIONS

WARNING

The use of portable automotive lifting devices is subject to certain hazards that cannot be 

prevented by mechanical means, but only by the exercise of intelligence, care, and common 

sense. It is therefore essential to have owners and personnel involved in the use and operation 

of the equipment who are careful, competent, trained, and qualified in the safe operation of the 

equipment and its proper use. Examples of hazards are dropping, tipping or slipping of loads 

caused primarily by improperly securing loads, overloading, off-centered loads, use on other than 

hard level surfaces, and using equipment for a purpose for which it was not designed.

Содержание OH 7014





























Отзывы: