SPECIFICITES
INSTRUCTIONS
Maximum load: 680kg
Beam lenght: 40cm
Chains : 4 chains 25cm long (Including shackle)
Unpacking
When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call
your reseller.
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text
under subheadings therein before set up or use of this product.
To prevent serious injury from tool failure:
Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further
use. Always ensure heavy loads are securely supported before lifting or moving.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram
near the end of this manual.
Functions
The Load Leveler is designed for use with a shop crane or hoist, to suspend an engine (or other heavy item up
to 1500 pounds) and adjust the angle of the piece to
make it level.
Assembling
The Handle (21) needs to be repositioned on the Load
Leveler before use.
To do this:
a. Remove the Bolt (19), Nut (20) and Handle from the
Crank (9).
b. Place the Handle outside of the
Crank and replace the Bolt and Nut.
OH 0238
LOAD BALANCER 680kg
