CLAS OE 5036, Руководство пользователя

Страница: 13 / 16

OE 5036
INFRARED THERMOMETER -38°/520°
NOTES :
1. Shiny or polished surfaces can give inaccurate readings. To compensate for lhis, caver the
surface with masking tape or fi at colored paint. When the tape or paint reaches the same
temperature as the target underneath, measure the tempe rature of the item.
2. The thermometer cannai measure through transparent surfaces such as glass or plastic. Il
will measure the surface temperature instead.
3. Steam, dust, smoke, and other optical obstructions can prevent accurate measurement.
The farther the thermometer is from the target, the larger the target area will be. This
relationship between distance and target size is normally expressed as the distance to
spot, or D: S ratio. Al a distance of 16cm, the «target» spot would be 2cm in diameter. The
thermometer will display the average temperature across the target area.
To clean the lens: Blow off loose particles using clean compressed air. Gently brush remaining
debris away with a moisi cotton cloth.
To clean the case: Wipe the case with damp, soft cloth.
Note: Do not use solvent or abrasive to clean the lens or the case, and do not submerge the
thermometer under water
FIELD OF VIEW
MAINTENANCE
Distance
Distance to Spot size = 8:1
6cm@48cm
4cm@32cm
2cm@16cm
Spot
center