HU 0139
HU 0149N HU 0159N HU 0180N
Then open the valve of the oil suction pipe (6). The used oil will fi ll inside the funnel.
You can see the capacity of the funnel on the sticker on the funnel glass. Do not exceed the
capacity of the funnel (HU 0159).
After the oil has been drawn in, to remove the used oil from the funnel, open the valve (7), which
is located under the funnel.
Warning! Warning!
Before opening the valve (7), check the tank. If there is air pressure in the tank, open the (8) and
release the air pressure.
• When the funnel is completely fi lled, never give air pressure to the funnel. Otherwise, the used
oil can be extracted from the plastic of the silencer.
• When the funnel is completely fi lled
with oil, be careful to transport it on fl at
ground or it may come out of the plastic
of the muffl
er.
In this case, remove the plastic from the
muffl
er and apply air pressure to the
funnel. And then clean up the part as in
the picture.
The capacity of the funnel may be
diff erent depending on the model.
Funnel glass
7
Valve
Insert the oil suction
probe.
Mount the oil suction hose on
the oil suction probe.
Open the valve on the oil
suction pipe and complete the
oil suction process (HU 0159).
