5
E
n
g
li
s
h
Use
Before initial use
Run the toaster on maximum setting a few times without bread in a well-ventilated
area as the toaster can emit strong odours when new. This is quite normal and is
caused by the burning of residues from the manufacturing process.
Toasting
1. Make sure that the lever is in the up position.
2. Plug the toaster into an earthed socket (230 V AC).
3. Place bread into the slots.
4. Choose the desired browning level, 1 (lightest) to 7 (darkest) by turning the
browning control knob. Experiment until you find the best setting.
5. To start toasting, depress the lever until it locks. The lever will only lock into place
if the toaster is connected to a power point.
6. The toaster automatically turns itself off when the toast is ready, and the slices
pop up. The toasting process can be stopped manually at any time by pressing
the cancel button.
7. Make sure that the lever is in the up position before unplugging the toaster.
N.B.
If only one slice is toasted, it will be browned more than it would be if two slices
are toasted at the same time.
Defrosting
Follow the instructions for toasting above but press the defrost button.
Reheating
Previously toasted bread can be reheated by following the instructions under toasting
above and then pressing the reheat button. The toast will then be warmed for a short
while before the toaster automatically shuts off. Keep an eye on the toast to make sure
that it does not burn.
