Clas Ohlson RC8030, Инструкция по эксплуатации

Страница: 32 / 44

32
E
N
G
LI
S
H
9.2 Use Monitor Manager
9.2.1 Connect to the camera and display the camera picture
To display the camera in the programme it must first be connected and given its own
channel number.
1. Install and start the programme according to the instruction in step 7.1.
2. Click on
1
to change the programme’s properties and search for the camera
on the network.
3. Select Lan (the camera should be listed) and click on Refresh to search for
connected cameras.
4. Select the camera on the list.
5. Give the camera a channel number
(in this case 1 ) and click on Add to
add the camera in the list.
6. Click Exit to close down the
dialogue box.
7. Press
►
to start the playback.
The camera picture should
now be displayed in the
programme.