5
English
Language
1. Press and hold in [
▼
] until the rolling language menu appears: “EN” (English),
“GE” (German), “FR” (French), “IT” (Italian), “SP” (Spanish).
2. Release [
▼
] when the desired language appears to select the desired language.
12/24 hour display
Press [
▲
] to select either a 12 or 24 hour clock display. “AM” and “PM” will be displayed if
the 12-hour clock has been chosen.
Setting the alarm
Alarm 1
1. Press [ mode ] until alarm 1 “AL1” appears in the lower right-hand corner.
2. Hold in [ mode ] until the hours display begins to flash.
3. Press or hold in [
▲
] or [
▼
] to set the hours.
4. Press [ mode ] again until the minutes display begins to flash.
5. Press or hold in [
▲
] or [
▼
] to set the minutes.
6. Press [ mode ] again. Both alarm time and the alarm 1 icon will be shown.
Alarm 2
1. Press [ mode ] until alarm 2 “AL2” appears in the lower right-hand corner.
2. Use the same procedures used for setting alarm 1.
Alarm activation/deactivation
• When the alarm sounds, its respective icon will also flash. Press [ ] to turn off
the alarm for the day. The alarm will then sound again after 24 hours.
• Press [ ] repeatedly in order to turn off alarm 1, alarm 2 or both permanently.
• If you are not successful in turning off the alarm by pressing [ ] the alarm will
continue to sound for the next 4 minutes before finally shutting off automatically.
Snooze
Hold in [ snooze • light ] when the alarm sounds. The alarm will mute and the display’s
backlight will be lit for 5 sec. The alarm will sound again after 4 min and will continue
with this pattern until the alarm is turned off permanently.
