Clas Ohlson LD2000-A, Руководство пользователя

Страница: 5 / 28

5
E
N
G
LI
S
H
Wrong
Right
Single wire Double wire
Use
ATTENTION!
- Avoid injury – use gloves when you handle the wire rope.
- Make sure that there are always at least 5 turns of wire rope still on the drum.
1) Uncouple the winch drum by pull-
ing out and turning the clutch turn
switch ¼ turn so the turn switch
stays in a pulled out position. Now
pull the wire rope out by hand.
Always spool out as much wire
rope as possible before you attach
the rope to the object you wish to
pull since that gives the winch the
best pull. Always hold the safety catch as you pull out the wire rope.
2) Attach the rope to the object and then engage the winch drum by turning the
clutch turn switch a ¼ turn so that the turn switch retracts and engages the drum.
ATTENTION! Never attach the wire rope directly around the object; instead
wrap some kind of strap around it.
4) Turn the clutch turn switch ¼ turn
so the turn switch retracts and
engages the winch drum BEFORE
you begin operating the winch. Do
NOT perform this operation when
the winch is in movement. The
clutch turn switch is kept in place
with a factory-supplied thread lock.
Make no modifications to the turn
switch.
5) Press the winch button to start
spooling the wire in.
6) Press the spool-out button to change direction.
7) Detach the wire rope.
ATTENTION! Never detach the wire rope when it is taut or under load.
8) Spool the wire rope back when you are finished. Make sure the wire winds
evenly on the drum.
Tips for use
Attaching with double wire rope and a block cuts the load on the winch by half.
Clutch turn switch